Rust-Oleum Supergrip Anti-Slip Spray - 500 Milliletre
Supergrip Anti-Slip Spray
This topcoat makes every surface non-skid in a second. SuperGrip™ Anti-Slip sprays are based on a fast drying acrylic modified short oil alkyd. The coloured products are based on lead-free and chromate-free pigments and contain a special anti-slip additive; should be applied on metal, concrete, ceramic and wood surfaces or properly prepared painted substrates.
Rust-Oleum 5401 Impregnation Primer - 5 Litre
5401 Impregnation Primer for Floors
Epoxy impregnation primer for concrete and other porous, mineral surfaces.
5401 Impregnation primer for floors provides a good key for adhesion on porous, mineral substrates prior to the application of several floor systems like epoxies and polyurethanes and can also be used as a tack-primer for concrete repair mortars like 5180.
Rust-Oleum 4900 / 4901 Multi-surface PU Heavy Duty Varnish
Rust-Oleum 4900 Multi-surface PU Heavy Duty Varnish - 2.5L
Clear, water-based, 2K polyurethane topcoat in matt or gloss. Does not yellow; ideal for interior and exterior. Can be used as a clear sealer for concrete to decrease dusting and increase 'cleanability', as an anti-graffiti coating and as a topcoat on previously painted surfaces to provide extra protection and/or change gloss level.
Rust-Oleum 5478 Asphalt Restorer - 5 Litre
Rust-Oleum 5478 Asphalt Restorer
A single application, refurbishing coating for car parks, driveways and footpaths, bicycle paths and more. Upgrades drab, grey, stained asphalt and tarmac; covers old line markings and repairs; avoids disruptive and costly re-surfacing. Rust-Oleum® Asphalt Restorer is a one component high quality bitumen based coating with fillers and special flow additives. For refurbishing car parks, driveways and footpaths.
Mathys Primer 44HS® - 5 Litre
Mathys Primer 44HS® (5 Litre, Greyish)
Ready to use single pack binding primer based on chlorinated rubber improves adhesion of coatings on mineral surfaces; improves the adherence of subsequent Topcoats on mineral surfaces. Clean and degrease the substrate. If the substrate is an acrylic paint, this must NOT be recoated with Primer 44HS® (the acrylic paint is affected by the solvents). In such a case, replace Primer 44HS® with Pegafix®.
Rust-Oleum NS100/NS200/NS300 Anti-Slip Granulates - 1 Kilogramme, 75 Gramme
Rust-Oleum NS100/NS200/NS300 Anti-Slip Granulates
NS100/NS200/NS300 anti-slip granulates, made of thermally split flint stones, turn a standard floor coating into a durable anti-slip coating. Thermally split flint stone granules provide a durable anti-slip finish; choose between small granules (NS100/NS200) or slightly larger granules (NS300).
Rust-Oleum Tarmacoat™ - 5 Litre
Rust-Oleum Tarmacoat™
Very fast-drying multi-purpose single pack floor paint for exterior use. Rain-proof and re-coatable after just one hour! Can be applied on slightly damp surfaces; single pack, no mixing required. The product will cure sufficiently in approximately 24 hours to accept light traffic (bicycle, car, etc.), but allow 48 hours before bringing the area back into full use.
Current in-stock options (see colour chart): Black, yellow, white, green, traffic red, traffic blue, light grey and mid grey.
Additional colour options available on request.
9200 Rust-O-Thane® - 1 Litre
Rust-Oleum 9200 Rust-O-Thane® - 1L
Satin water based polyurethane for a very durable and colourfast finish on your flooring system.
Rust-O-Thane® 9200 is intended for application on substrates, which are coated with Rust-Oleum® or Mathys® epoxy or acrylic coatings. The application area consists of coated floors, coated walls and primed metal. 9200 assures appropriate protection against solvents, moderate alkalines, weak acids and chemical cleaning.
Rust-Oleum 9100 Epoxy Coating
Rust-Oleum 9100 Epoxy Coating
Two-pack, glossy epoxy floor paint for garages, warehouses, indoor car parks etc. Optimal protection in only one or two layers.
This all-round product is also suitable for application on metal.









