Douglas Boiled Linseed Oil
Douglas Boiled Linseed Oil - 500ml
Boiled Linseed Oil is for interior and exterior use on bare woods (other than oak). It gives a slightly glossy film with an attractive reddish tint and is great for restoring and enhancing 'tired' wood. It is also used as an effective sealer for terracotta tiles.
Douglas Danish Oil
Douglas Danish Oil - 500ml
For sealing and varnishing all types of interior timbers and sometimes used externally on hardwood garden furniture. If using on bare wood one would normally look to apply three coats to give a hard, water-resistant low-sheen finish. When project is fully dry, buff surfaces with a lint free cloth and wipe over with a damp cloth to maintain.
RAL K5 (Colour Fan Deck)
RAL K5 - Colour Fan Deck
This indispensable RAL K5 colour fan deck contains all 213 RAL CLASSIC colours.
Due to the full-page colour illustration, it is especially suitable for colour combinations and colour comparisons.
Zeroflame Fire Retardant Treatment
Zeroflame Fire Retardant Treatment - Clear 5L
Never before has there been such a simple product to use for the protection of timber against fire!
Colourless, odourless and with a clear natural, moisture-resistant finish, this non-allergic fire retardant treatment is biologically and ecologically safe; application by brush, roller or spray.
Tec 7 - Seal, Mount, Bond (Various Colours)
Tec 7 (black, white, grey, brown, clear)
Seal, mount and bond all common building materials – even under water.
TEC7 PUR B2 Expanding Foam - 750ml
TEC7 PUR B2 Expanding Foam (750ml)
Tec7 Pur is a B2 fire rated foam, suitable for a wide variety of mounting and insulation jobs such as: filling of cavity joints between window and door frames, skylights and brickwork, filling of walls, joints etc.
Sikkens Cetol WP562 - 5 Litre Minimum Quantity
Sikkens Cetol WP562
Waterborne, translucent primer (fluid timber protecting agent) with blue stain fungi protection for wooden constructions, exterior; deep penetration; good run-off properties.
Priced per litre; minimum quantity: 5L tin. More information coming soon.
BONDERITE Adhesion Promoter No Rinse
The most economical way to improve the performance of your line with the minimum space requirements - BONDERITE Adhesion Promoter No Rinse provides a solution for every challenge:
- Allows quality improvement with minimal investment
- Free from Cr6+, Ni, toxic heavy metals and highly reactive substances
- Easy to install; easy to use
View the brochure HERE.
BONDERITE E-CO ST4
BONDERITE® E-CO ST4 is a modular system device that can be used to measure independent variables, including:
- pH measurement
- contact conductivity measurement
- conductivity measurement with inductive technology (free maintenance)
In the two standard configurations, designed for cycle control with four active zones or cycle control with three active zones plus washing with demineralised water, coupled with VCL or VMS-MF electronic dosing pump, this system is one of the most advanced there is in terms of control and dosing of concentrated products in pre-painting treatment of metals.
View the brochure HERE.